Sfera Proximity Reader
Installer manual
15
Resident
5
It is possible to continue to program further resident
badges (max. 5 per apartment) one after the other.
6 Press the pushbutton, or wait 30 seconds to exit the
procedure.
The programming sequence must start within 30 seconds and must be carried out in
one stage.
3 Move a new resident badge near the reader to save it.
4 The flashing of the green LED and a short beep
confirm that the resident badge has been saved.
A short beep and the switching off of the LED confirm that the programming sequence has been
completed. The Sfera Proximity Reader is ready for normal operation.
Resident
To Next Page
Loading...
