btsr SM-DIN/MULTILOOP/ETH - Command Log

Installation and Connections
SM-DIN/MULTILOOP.. - 2.14 -
BUS WARNING
(Debug/Service option)
Enter the BOARD SETUP menu.
Select BUS WARNING
to go back to BOARD SETUP menu
ON = Enable warning related to wrong communication with PLC and SM-
DIN
OFF = Disable warning related to wrong communication with PLC and SM-
DIN (default)
3 sec to confirm and go back to BOARD SETUP menu
COMMAND LOG
(Debug/Service option)
Enter the BOARD SETUP menu.
Select COMMAND LOG
to go back to BOARD SETUP menu
BOARD SETUP
→
COMMAND LOG
BOARD SETUP
→
BUS WARNING