Bucher iValve i250 - Construction and Function; Factory Settings Ivalve

iValve Lift Control Valve4 Construction and function
10/31
300-I-9010544-EN-01/10.2014
4 Construction and function
IMPORTANT!: Information on schematics and diagrams is avail
able in the iValve Planning Information (300-D-9010542).
4.1 Factory settings iValve
Installation specific settings are stored on the ParamCard:
S Kit type
S Cylinder type and diameter
S Max. speed UP and DOWN
S Deceleration distance acc. to diagram
S Travel curve settings
S Other settings
Issue: 09.2015
10/31
Reference: 300-I-9010544-EN-01