iValve Lift Control Valve2 Safety instructions
6/31
300-I-9010544-EN-01/10.2014
2 Safety instructions
This documentation (manual) advises the user of the dangers and re
maining risks that can arise even when the product is being used pro
perly and for its intended purpose. It is essential to take note of the sa
fety instructions in each section.
2.1 Description of the safety notices
This commissioning and maintenance manual contains safety informa
tion for the safe operation of the product. Dangers and residual risks are
signalled with the following elements:
2.1.1 Meaning of the signal words
The table below shows the meaning of the signal words that are used to
identify the different levels of danger.
Signal words Meaning
DANGER!
This denotes a directly imminent danger. If it is not at
tended to, it will result in death or serious injuries to
people.
WARNING!
Denotes a potentially dangerous situation. If it is not
prevented, it may result in death or serious injuries to
people.
CAUTION!
Denotes a potentially dangerous situation. If it is not
prevented, it may result in slight or minor injuries to
people.
ATTENTION!
Denotes a potentially harmful situation. If it is not pre
vented, the product or its surroundings may be dama
ged.
2.1.2 Meaning of the pictograms
The following pictograms are used as warning symbols. They are com
bined with the appropriate signal word, depending on the danger level.
Meaning
This warning symbol is used in conjunction with the
signal words "DANGER", "WARNING" or "CAU
TION".
Warning of dangerous electrical voltage.
This warning symbol is used exclusively in conjunc
tion with the signal word "WARNING".
This warning symbol indicates the risk of a large po
tential difference (ESD).
Reference: 300-I-9010544-EN-01
To Next Page
Loading...
