iValve Lift Control Valve2 Safety instructions
8/31
300-I-9010544-EN-01/10.2014
2.3.2 Operator's obligations
Working with safety in mind
S Only operate the pump if it is in perfect technical condition; only use it
as intended, staying aware of safety and risks, and adhearing to the
instructions in this manual
S Ensure that the following are observed and monitored:
- adherence to intended use
- statutory or other safety and accident-prevention rules
- safety regulations governing the handling of hazardous sub
stances
- applicable standards and guidelines in the country where the
pump is operated
S Make protective equipment available
Staff qualifications
S Ensure that all personnel tasked with work on the pump have read
and understood this manual and all other applicable documents, es
pecially the safety, maintenance and repair instructions, before they
begin the job
S Organize responsibilities, who is in charge of any specific duty and
how personnel are supervised
S Ensure that all work is carried out by specialist technicians only:
- fitting, repair and maintenance work
- work on the pump electrical system
Warranty
S Obtain the manufacturer's approval prior to carrying out any modifica
tion, repair or alterations during the warranty period
2.3.3 Duties of the operating staff
S Observe and keep legible all instructions given on the Lift Control
Valve, e.g. the arrow indicating the direction of rotation and the
markings for fluid connections
S Carry out work on the Lift Control Valve only while the motor is not
running
S Isolate the motor from its supply voltage and keep it locked in that
state while carrying out any fitting or maintenance work
Reference: 300-I-9010544-EN-01
To Next Page
Loading...
