iValve Lift Control Valve 2 Safety instructions
7/31
300-I-9010544-EN-01/10.2014
2.1.3 Example of a safety notice
S Pictogram
S Signal word
S Type and source of danger
S Possible consequences of the danger
S Measures for preventing the danger
WARNING!
Dangerous electrical voltage
Touching electrical components may result in serious injury or
death. During installation or repair work, ensure that the power
supply is interrupted.
2.2 Basic principles
The lift control valve is an electronically controlled hydraulic valve block
for controlling hydraulic-powered passenger and goods lifts.
The lift control valve is situated on a hydraulic power unit and activated
by a lift control system.
2.3 General safety instructions
ATTENTION!
Take note of the following instructions before carrying out any
work.
2.3.1 Intended use
The Lift Control Valve has been built in accordance with the state of the
art and recognised safety regulations. Nevertheless, risks to the life and
limb of users or third parties may arise during its use, or damage to the
car frame kit or other material assets may result.
S Keep this manual and all other applicable documents complete and
legible, and accessible to all personnel at all times
S Do not work in any manner that endangers personnel or uninvolved
third parties
S If there is a safety-related fault, shut down the Lift Control Valve im
mediately and have the fault rectified by a competent person
S In addition to the entire documentation for the product, always com
ply with statutory or other safety and accident-prevention rules as
well as with the applicable standards and guidelines in the country
where the pump is operated
Reference: 300-I-9010544-EN-01
To Next Page
Loading...
