iValve Lift Control Valve 1 About this document
5/31
300-I-9010544-EN-01/10.2014
1 About this document
This commissioning and maintenance manual provides the basis for us
ing the lift control valve iValve i250 / i500 and iCon electronic card for its
intended purpose in a proper, effective, and safe manner.This manual
must be accessible to the commissioning and service personnel.
1.1 Scope
This manual is:
S a part of the iValve lift-control valve / iCon for commissioning and
maintenance
S applicable to the valve and all components referred to, such as the
iCon, Handterminal, iWIN, power supply unit and their connectors
and cables.
1.2 Target group
This commissioning and maintenance manual provides commissioning
and service personnel with all the information required for installation
and commissioning.
1.3 Other applicable documents
Term Definition
300-P-9010073 Recommended hydraulic fluids
300-P-9010528 Data sheet for lift control valve iValve i250/i500
300-D-9010542 Planning information iValve
300-P-9010553 Data sheet for handterminal
300-I-9010543 Parametrisation and maintanance manual
ESVH 001/1 Type examination certificate
300-S-9010554 Service manual for iBox
300-S-9010437 Spare parts iValve i250
300-S-9010548 Spare parts iValve i500
IMPORTANT!: These and other documents can be found in the
LOGintern section of our website
www.bucherhydraulics.com
1.4 Specialist terms
Term Definition
iValve Intelligent lift control valve
iCon Electronic control card for iValve valve
Handterminal Terminal (optional) for the parameterisation of the iValve
iWIN PC-software (optional) for the parameterisation of the iValve
iBox Sensor unit in the iValve
iTeach Program on the iCon
ParamCard Memory card
SMA Monitoring of theUCM/A3-valve
(“Self Monitoring Acknowledgement”)
Reference: 300-I-9010544-EN-01
To Next Page
Loading...
