29
Melting point B-540 5 Operation
5.9.2 Modification of time, date and company
name
If you connect the unit to a printer, the melting points may be
printed out with other parameters. In order to permit a better
assignment of the printouts, each printout will bear the following:
• the name of the own company
• the time of melting point determination
• the date of melting point determination
Press MENU for three seconds to return to the range of
submenus.
By pressing UP/DOWN, the individual digits are changed; by
pressing NEXT, the horizontal cursor position is changed.
By pressing ENTER, the date field will be displayed and this is
then adapted in the same way as described above.
By pressing ENTER, the field for the company name is
displayed and this is then adapted in the same way as described
above.
By pressing ENTER, the newly entered company name will
be used for all new determinations.
In order to return to main menu 1, press MENU again for
three seconds.
TIME : XX:XX
DATE : XX.XX.XX
NAME : XXXXX
To Next Page
Loading...
Need help?
General