Buchi Pure C-810 - Injecting a Sample into the Flash System

Büchi Labortechnik AG
Operation | 6
Operation Manual Pure Chromatography Instruments
55/102
u Press the plunger.
u Wait until the run starts.
u Disconnect the syringe at the inert loop
port.
6.4.2 Injecting a sample into the flash system
Injecting a sample into the flash system at the luer port
CAUTION
Not removed syringe after injection.
A not removed syringe after injection can lead to spill of solvent and injuries.
u Remove the syringe after injection.
All manuals and user guides at all-guides.com