Buchi Pure C-810 - Installing and Removing a Column

6 | Operation
Büchi Labortechnik AG
58/102
Operation Manual Pure Chromatography Instruments
u Lift the clamping plate to release the
lock mechanism and pull up the upper
part of the cartridge holder.
u Install the cartridge by pushing the
cartridge inlet down into the luer
fitting at the bottom plate.
u Lower the upper part of the cartridge
holder over the luer connection.
u Align it.
u Firmly press the arm in place to ensure
a proper seal.
6.4.4 Installing and removing a column
NOTE
Removing is done in reverse sequence.
All manuals and user guides at all-guides.com