Buchi Pure C-810 - Taking Instrument Out of Service; Procedure for Taking Instrument Out of Service; Instrument Disposal Guidelines; Returning the Instrument for Service

9 | Taking out of service and disposal
Büchi Labortechnik AG
92/102
Operation Manual Pure Chromatography Instruments
9 Taking out of service and disposal
9.1 Taking out of service
u Switch off the instrument and disconnect it from the mains power supply.
u Remove all tubing and communication cables from the device.
9.2 Disposal
The operator is responsible for proper disposal of the instrument.
u When disposing of equipment observe the local regulations and statutory
requirements regarding waste disposal.
u When disposing, observe the disposal regulations of the materials used. Materials
used see Chapter3.5 "Technical data", page18
9.3 Returning the instrument
Before returning the instrument, contact the BÜCHI Labortechnik AG Service
Department.
https://www.buchi.com/contact
All manuals and user guides at all-guides.com