Buchi Pure C-815 - Installing the Exhaust (ELSD Only); Assembling the Waste Bottle; Installing the Waste Level Sensor

5 | Installation
Büchi Labortechnik AG
28/102
Operation Manual Pure Chromatography Instruments
5.9 Installing the exhaust (ELSD only)
u Press the exhaust gas hose (2) on the
exhaust (1).
1
2
5.10 Assembling the waste bottle
NOTICE
Waste bottle on top of the instrument
Waste bottle on top of the instrument can cause property damages.
u Make sure that there is a decline between the connection on the instrument and
the waste bottle.
u Put the waste line into the waste bottle.
5.11 Installing the waste level sensor
Precondition:
R Make sure that the instrument is not
connected to the power supply.
u Attach the waste level sensor to the
instrument. Connections see
Chapter3.2.4 "Connections on gradient
valve", page17
u Calibrate the waste level sensor. See
Chapter5.12 "Calibrating the waste
level sensor", page29
All manuals and user guides at all-guides.com