Buchi Pure C-815 - Calibrating the Waste Level Sensor; Assembling the Dry Air Supply (Option)

Büchi Labortechnik AG
Installation | 5
Operation Manual Pure Chromatography Instruments
29/102
5.12 Calibrating the waste level sensor
Navigation path
➔ Tools ➔ Calibration and Defaults
Precondition:
R The waste level sensor is not covered by liquid waste.
u Navigate to the Calibration dialog according to the navigation path.
ð The display shows the dialog box Calibration .
u Tap [Zero] for [Waste].
u Tap the button [Close].
ð The dialog box closes.
5.13 Assembling the dry air supply (option)
u Connect the signal cable from the air
supply to the instrument.
u Connect the gas connection. See
Chapter5.14 "Assembling the gas
connection (option)", page30.
All manuals and user guides at all-guides.com