1 Information button
(Information about the selected col-
umn)
Navigation path
➔ Conditions panel
u Navigate to the
Conditions selection
panel according the navigation path.
u Tap the input box next to [Column].
ð The display shows a dialog with an alphanumeric input box.
u Enter a name for the column.
u Tap the button [OK].
u Tap the input box next to [Flow rate].
ð The display shows a dialog box with a numeric input box.
u Enter a value for the flow rate.
u Tap the button [OK].
u Tap the input ox next to [Max. Pressure].
ð The display shows a dialog box with a numeric input box.
u Enter the maximum pressure for the column.
u Tap the button [OK].
To Next Page
Loading...
