Büchi Labortechnik AG
Operation | 6
Operation Manual Pure Chromatography Instruments
45/102
6.2.3 Selecting a solvent
Navigation path
➔ Solvent selection panel
Precondition:
R The required solvents lines are connected and assigned. See Chapter5.7
"Assigning solvent to solvent lines", page26
u Navigate to the
Solvent selection
panel according the navigation path.
u Tap the drop-down list next to A: .
ð The display shows a drop-down list with the assigned solvents.
u Tap the required solvent.
ð The solvent is selected
ð The drop-down list closes.
u Select more solvents for the mobile phase according to your needs.
6.2.4 Editing the gradient
The composition of the mobile phase as a function of time can be indicated by
entering the gradient. Four solvent lines can be used to generate a binary gradient.
The solvents used to define the gradient can be altered during the separation.
To Next Page
Loading...
