Buchi Pure C-815 - Method Editing and Tasks During Separation

6 | Operation
Büchi Labortechnik AG
36/102
Operation Manual Pure Chromatography Instruments
Menu Submenu / Action Explanation
[Tools] [Solvent Loading] Assign a solvent to a solvent line.
See Chapter5.7 "Assigning solvent to sol-
vent lines", page26
[Solvent Definition] Define solvents.
See Chapter6.3 "Editing a solvent",
page53
[Vapor Sensors and Limits] Edit the vapor sensor sensitivity.
See Chapter6.2.9 "Editing the vapor sen-
sor sensitivity", page52
[Configuration] System configurations.
[Calibration and Defaults] Calibrate the screen.
Set time and date.
Reset UV lamp.
Calibrate solvent level sensors.
See Chapter5.8 "Calibrating the solvent
level sensor", page27
Calibrate the waste level sensor.
See Chapter5.12 "Calibrating the waste
level sensor", page29
Set alarms
[Manual control] Maintenance actions.
See Chapter7.6 "Cleaning the instru-
ment", page77
See Chapter7.7 "Cleaning the solid
loader", page78
See Chapter7.8 "Removing solvent from
an used cartridge", page78
See Chapter8.8 "Resetting the Fraction
collector arm", page89
[NP<>RP] Change back and forth between normal
phase and reverse phase
[Product Services]
(C-810 C-815 C-850 only)
Override max. pressure limit for car-
tridges.
[UV Baseline] Adjust the baseline to zero during a run.
[Language] Select a language.
[Service] BUCHI service technicians only
[Help] [About] The display shows instrument details.
[View Manual] The display shows the Operation manual.
All manuals and user guides at all-guides.com