Need help?Do you have a question about the Buddipole PowerPlus and is the answer not in the manual?
Power| absolute maximum DC input voltage | 20 V DC |
|---|---|
| minimum DC input voltage | 11 VDC |
| minimum battery input voltage | 10 V DC |
| maximum battery input voltage | 16 V DC |
| maximum load current | 35 A |
| maximum charge current | 6 A |
| over voltage disconnect range | 14 – 16 V |
| low voltage disconnect range (battery) | 10 – 13 V |
Ports & Interfaces| number of DC output ports | 4 |
|---|---|
| number of USB outputs | 2 |
| maximum USB output current | 1.5A maximum (each port) |
| DC power connectors | Anderson Powerpole® 45A |
Operating Environment| operating temperature range | 0 – 40 degrees Celsius |
|---|---|
| reverse polarity protection | DC and Battery inputs |
| audible alarm | User settable enable, disable |
Weight and Dimensions| overall size | 7.5” (W) x 3.2” (D) x 1.3” (H) |
|---|---|
| overall size (metric) | 190 (W) x 82 (D) x 33 (H) mm |
| weight | 11.3oz (320.3 g) |
Manages output based on voltage thresholds, user adjustable.
Two groups with individual current limits and ON/OFF control.
Supports Lead Acid/LiFePO4, adjustable charge current up to 6A.
Detailed explanation of the OLED display, navigation buttons, and output control buttons.
How output groups are protected and managed by current limits.
Describes the three-phase charging cycle for Lead-Acid batteries.
Explains the charging phases for Lithium Iron Phosphate batteries.
Explains how to move between different screens and menus on the POWERplus.
Options for DCIN, Battery, or Mobile power source selection.
Setting the voltage threshold for automatic switch to battery in Mobile mode.
Choosing the correct battery chemistry for optimal charging.
To Next Page