C
chapmanmarilynJul 27, 2025
What to do if the gas valve does not close on my Buderus Logano G124X II/SP Boiler?
- SSean NicholsonJul 27, 2025
If the gas valve on your Buderus Boiler fails to close, the suggested solution is to replace the gas valve.
To Next PageTo Next PageWhat to do if the gas valve does not close on my Buderus Logano G124X II/SP Boiler?
If the gas valve on your Buderus Boiler fails to close, the suggested solution is to replace the gas valve.
What to do if I checked 24-V voltage at the gas valve of my Buderus Boiler?
If the 24-V voltage at the gas valve of your Buderus Boiler is OK, the suggested solution is to replace the gas valve.
What to do if the ignition flame goes out on my Buderus Logano G124X II/SP Boiler?
If the ignition flame on your Buderus Boiler goes out, first verify that the thermal element is securely screwed to the gas valves. If it is, then replace the thermal element.
What to do if the ignition flame surrounds the thermocouple and burns evenly with a bluish flame on my Buderus Boiler?
If the ignition flame surrounds the thermocouple and burns evenly with a bluish flame on your Buderus Boiler, the suggested solution is to replace the thermocouple.
General| Model | Logano G124X II/SP |
|---|---|
| Category | Boiler |
| Fuel Type | Gas |
| Heat Exchanger Material | Cast Iron |
| Operating Pressure | 3 bar |
