Buehler ISOMET 2000 - Page 33

ISOMET™ 2000 Accessories and Supplies
Blades
ISOMET™ 2000 Wafering Blades
Blade Type 4″ dia.
(10.2 cm)
Thickness 5″ dia.
(12.7 cm)
Thickness 6″ dia.
(15.2 cm)
Thickness 7″ dia.
(18.8 cm)
Thickness
Series 20 HC
Diamond,
high concentration
11-4215 .020″
(0.5 mm)
11-4237 .025″
(0.64 mm)
Series 15 HC
Diamond,
high concentration
11-4244 .012″
(0.3 mm)
11-4245 .015″
(0.4 mm)
11-4246 .020″
(0.5 mm)
11-4247 .025″
(0.63 mm)
Series 20 LC
Diamond,
low concentration
11-4225 .020″
(0.5 mm)
11-4227 .025″
(0.64 mm)
Series 15 LC
Diamond,
low concentration
11-4254 .012″
(0.3 mm)
11-4255 .015″
(0.4 mm)
11-4276 .020″
(0.5 mm)
11-4277 .025″
(0.64 mm)
Series 10 LC
Diamond,
low concentration
11-4285 .015″
(0.4 mm)
11-4287 .020″
(0.5 mm)
Series 5 LC
Diamond,
low concentration
11-4295 .015″
(0.4 mm)
ISOCUT
®
Wafering Blades
Low concentration 11-4264 .012″
(0.3 mm)
11-4265 .015″
(0.4 mm)
11-4266 .020″
(0.5 mm)
11-4267 .025″
(0.6 mm)
Abrasive Cut-off Wheels
For ferrous
materials
11-4207-010
.030″
(0.8 mm)
For tough non-
ferrous materials
11-4207-010
.030″
(0.8 mm)
* Use 1/2″ x 1/2″ x 3″ (13mm x 13mm x 76mm) Dressing Stick, Part Number 11-1190
for coarse series 20 & 15, or 11-1195 for fine series 10 & 5 Blades.
31
MA112480-20 03/06/00