Buffalo B100 - User Manual

42 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Buffalo Pellet Stoves

Model B100

Wood Pellet Stove

Owner’s Installation and

Operation Manual

• Read this manual in its entirety before installation or use of this pellet-heating appliance.

• Failure to follow these instructions may result in property damage, bodily injury or death.

• Contact local building inspector and/or fire officials to identify restrictions, obtain necessary permits,

installation requirements and/or inspection requirements in your area.

• Contact your local dealer with questions or with requests for warranty service.

• Save this manual for future reference.

Snyder Manufacturing

255 Rochester Street

Salamanca, NY 14779

Table of Contents

Questions and Answers

L
Lori FloresSep 12, 2025
Why does my Buffalo B100 Pellet stove have a short flame at high feed rates?
- L
  linda14Sep 12, 2025
  If your Buffalo Pellet stove has a short flame at high feed rates, it could be due to several factors. First, the feed rate might be set too low, so increase the base feed rate of the stove using "Set-up Mode". Natural draft on the venting system may require the installation of an optional air damper. Contact your dealer to obtain a Buffalo Pellet Stove external air damper. The problem may also be caused by poor quality fuel, so acquire and use better quality fuel.
J
jeanette37Sep 14, 2025
Why does the flame go out at lower feed rates on my Buffalo B100?
- C
  Curtis OrtegaSep 14, 2025
  If the flame goes out at lower feed rates on your Buffalo Pellet stove, it is likely because the feed rate is set too low. Increase the base feed rate of the stove using the "Set-up Mode" to resolve this issue.

Summary

Safety and Warnings

Specifications

Heating and Electrical Specs

Details BTU output, efficiency, electrical requirements, and dimensions.

Fuel and Packaging

Specifies fuel requirements and lists included/optional accessories.

Installation Guide

Installation Notices and Checklist

Covers safe installation, permits, testing, cautions, and a pre-operation checklist.

Floor Protection and Clearances

Details requirements for non-combustible floor protection and clearances to materials.

Exhaust System Installation

Guidelines for exhaust system installation, sizing, and termination.

Installation Types and Air Supply

Covers combustion air, fresh air intake, and various installation types (horizontal, vertical, mobile).

Stove Operation and Controls

How the Stove Works

Explains the process of fuel delivery, burning, and heat distribution.

Control Panel Overview

Details the control panel, operating modes (Automatic/User Control), and temperature settings.

Start-Up, Shutdown, and Errors

Covers start-up, shutdown processes, error codes, and safety features.

Operating Modes

Describes Automatic Temperature Control and User Control modes, and how to switch between them.

Maintenance and Troubleshooting

Routine Maintenance Schedules

Details daily, weekly, semi-weekly, monthly, and annual cleaning procedures.

Troubleshooting Common Issues

Provides solutions for common problems like no firing, error codes, and operational faults.

Limited Warranty Information

Warranty Coverage and Exclusions

Details what is covered, not covered, conditions, and exclusions for the warranty.

Buffalo B100 Specifications

General

Brand	Buffalo
Model	B100
Category	Pellet stove
Language	English