Buhler 435 - Section 2 - General Information; Tractor Identification Data; Vehicle Identification Plate; Tractor Identification

435/485/535
2-3
F2-7
F2-6
Tractor Identification Data
The tractor and its major components are identified
using serial numbers and/or manufacturing codes.
These codes are recorded on the Vehicle Identification
Plate, (ID plate).
NOTE: Tractor identification data must be supplied
to the dealer when requesting parts or service.
Identification data is needed to aid in identifying the
tractor if it is ever stolen.
Please record the following identification data in the
sample ID plate, right.
The following information provides the locations of the
identification data.
Vehicle Identification Plate
The Vehicle Identification Plate (1) is located on the
left rear underside corner of the cab.
The ROPS identification plate (2) is located adjacent
to it.
Tractor Identification
The tractor serial number (3) is stamped on the front
frame.
This serial number stamp is used in the event that the
Tractor Identification Plate is removed or mutilated.
Section 2 - General Information
Tractor Identification Data
1
3
2
MODEL
TRANSMISSION
HYDRAULIC PUMP
FWD-FACTOR
BUHLER VERSATILE INC.
TRACTOR NUMBER
ENGINE
FRONT AXLE
UNIT
REAR AXLE
HYDRAULIC LIFT
SPECIAL ORDER
F2-5