Vehicle
Personalimati
Memory
Seat
and
Mirrors
To save your
seat
and
mirror positions into memory,
use the following procedure:
1.
First identify the DRIVER
#
on the Driver Information
Center (DIC) by pressing the MEMORY button
1
or
2
or by pressing the unlock button on the remote
keyless entry transmitter. See
Driver Information
Center (DIC) on page
3-47.
2.
Adjust the driver’s seat and lumbar position to a
safe and comfortable driving position. Adjust both
outside mirrors to suit you. See
Outside Power
Mirror on page
2-38.
corresponding with your DRIVER
#
displayed on the
DIC for longer than three seconds. You will hear
positions have been entered into memory.
3.
Press
and hold the MEMORY button
(1
or
2)
.
two beeps confirming that the seat and mirror
If your vehicle has this feature, the controls are located on
To
set
the
seat
and
mirror
positions
for
a
second
driver,
the driver’s door panel, and are used to program and
follow the previous steps, but start by pressing the
recall memory settings for the driver’s seating, outside
unlock button on the transmitter that displays the other
mirror positions and climate controls. See
Climate Control
DRIVER
#
on
the
DIG.
B~
Sure
to
use
the
MEMORY
System on page
3-23
for more information.
bljtton
which
corresponds to the DRIVER
#
identified by
the second transmitter.
2-49
To Next Page
Loading...
