Your vehicle is equipped
with rear door security
locks that prevent
passengers from opening
the rear doors of your
vehicle from the inside.
To use one of these locks, do the following:
1.
Open the rear door you want to lock.
2.
Move the lever located on the inside door edge,
all the way up to the lock symbol.
3.
Close the door.
The rear doors of your vehicle cannot be opened from
the inside when this feature is in use.
To open a rear door when the security lock is on,
do the following:
1.
Unlock the door.
2. Open the door from the outside.
If you don’t cancel the security lock feature, adults or
older children who ride in the rear seat won’t be able
to
open the rear door from the inside. You should let
adults and older children know how these security locks
work, and how to cancel the locks.
To cancel the rear door lock, do the following:
1.
Unlock and open the door from the outside.
2.
Move the lever all the way down to the unlock
3.
Do
the same for the other rear door.
The rear door locks will now work normally.
symbol.
Lockout Protection
The power door locks will not work
if
the kev is in the
ignition and a door is open. You can override this feature
by holding the driver’s side power door lock switch for
more than three seconds.
2-1
3
To Next Page
Loading...
