Climate
Controls
Personalization
If your vehicle is equipped with this feature, up to two
drivers are able to store and recall climate control
settings for the temperature, the fan speed and the
direction of the airflow.
Memory buttons
1
and
2
are located on the driver's
door panel and correspond to the numbers
1
or
2
found
on the back of each remote keyless entry transmitter.
To
store settings, do the following:
1.
Select the desired temperature, fan speed and
airflow mode.
If
desired, a separate temperature
setting may also be selected for the front seat
passenger. For information on how to do this,
see
Dual Automatic Climate Control System on
page
3-26.
2;
Locate
memory
buttons
I
and
2
on
the driver's
door panel.
3.
Press the memory button on the door panel that
corresponds to the number on the back
of
the
transmitter you are programming, until
you
hear two
beeps. The beeps confirm that your selection has
been saved and can now be recalled. For more
information on the memory feature, see
Memory
Seat and Mirrors
on
page
2-49.
Follow these steps each time you want to change the
stored settings.
To
recall the ciimate controi settings last stored on your
transmitter, press the unlock button on your remote
keyless entry transmitter and put the ignition in
ACCESSORY
or
RUN.
The settings will be recalled.
3-3
1
To Next Page
Loading...
Need help?
General
