If a bulb
is
burned out, replace it to help avoid an
accident.
If
the arrows don’t go on at all when you signal
a turn, check the fuse. See
Fuses
and
Circuit
Breakers
on
page
5-90.
Turn
Signal
On
Chime
If
your turn signal is left on for more than
0.8
miles
(1
-3
km),
a
chime will sound at each flash of the turn
signal. To turn
off the chime, move the turn signal lever
to the
off
position.
Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high beam
or high beam
to
low beam, pull the turn signal lever
toward you and release it.
When the high beams are
on, this light located on the
instrument panel cluster
will also be on.
If
your vehicle is equipped with the Head-Up Display
(HUD),
this symbol will also appear in the display area to
indicate the high beams are on. See
Head-Up Display
(HUD)
on
page
3-79
for more information.
Flash-To-Pass
This feature lets you use the high-beam headlamps to
signal the driver in front
of
you that you want to pass.
It works even
if
your headlamps are
off.
Pull
the turn signal lever toward you briefly to
flash-to-pass.
If the headlamps are
off or on low beam, the high-beam
headlamps will turn
on.
They’ll stay on as long as
you hold the lever toward you and the high-beam
indicator on the instrument panel cluster will come on.
3-6
To Next Page
Loading...
