Sc
7ng Cruise Control
P
---
~~
IOU
leave your c se control on when you’re
not Using cruise, you might hit
a
button and go
into cruise when you don’t want to. YOU could
be startled and even lose control. Keep the
cruise control switch
off
until you want to use
cruise control.
1.
Press the
ON/OFF
switch to turn cruise control on.
An indicator light will come on in the switch to show
that cruise control is on.
2.
Get up to the speed you want.
3.
Press the SET/COAST switch and the CRUISE light
4.
Take your foot
off
the accelerator pedal.
on the instrument panel cluster will illuminate.
Resuming a Set Speed
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts
off the cruise control. But you don’t need to reset it.
Once you’re going about
25
mph
(40
km/h) or more,
you can briefly press the RESUME/ACCEL
(resume/accelerate) switch to return to your desired
preset speed.
You’ll go right back up to your chosen speed and stay
there.
If
you press and hold the RESUME/ACCEL
switch, the vehicle will keep going faster until you
release the switch or apply the brake.
So
unless you
want to go faster, don’t press and hold the
RESUME/ACCEL switch.
3-1
0
To Next Page
Loading...
