10.
Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine cooling fans.
11.
By
this
time, the coolant
level
inside the radiator
filler neck may be lower.
if
the level is lower, add
more of the proper
DEX-COOL@ coolant mixture
through the filler neck until the level reaches
the base of the filler neck.
12. Then replace the
pressure cap. At any
time during this
procedure
if
coolant
begins to flow out
of the filler neck,
reiestaltthe
-pefsu
re
cap. Be sure the arrow
on the pressure cap
lines up like this.
5-37
To Next Page
Loading...
