What
to
Use
When you need windshield washer fluid, be sure
to
read
the manufacturer’s instructions before use.
if
you will
be
operating your vehicle
in
an area where the
temperature may fall below freezing, use a fluid that
has sufficient protection against freezing. See
Engine
Compartment Overview on page
5-
12
for reservoir
location.
Open the cap with the
washer symbol on it.
Add washer fluid until the
tank is
full.
e
e
e
When using concentrated washer fluid,
follow the manufacturer’s instructions for
adding water.
Don’t mix water with ready-to-use washer fluid.
Water can
cause
the solution to freeze
and
damage your washer fluid tank and other parts
of the washer system.
Also,
water doesn’t
clean as well as washer fluid.
Fill your washer fluid tank only three-quarters
full when
it’s
very cold. This allows for
expansion if freezing occurs,which-cauld
damage the tank if
it
is completely full.
Don’t use engine coolant (antifreeze) in your
windshield washer.
It
can damage your
washer system and paint.
5-39
To Next Page
Loading...
