Buick 2003 LeSabre - Page 299

7. Connect the red
positive
(+) cable to the
positive
(+) terminal
of the dead battery.
Use a remote
positive (+) terminal
if
the vehicle has one.
8. Don’t let the other end
touch metal. Connect it
to the positive
(+)
terminal of the good
battery. Use a remote
positive
(+) terminal
if the vehicle has one.
9. Now connect the black
negative
(-) cable to
the negative
(-)
terminal of the good
battery. Use a remote
negative
(-) terminal
if the vehicle has one.
Don’t let the other end touch anything until the
next step. The other end
of the negative (-) cable
doesn’tgo to the dead battery.
It goes to a heavy,
unpainted metal engine part or to a remote
negative
(-) terminal on the vehicle with the
dead battery.
5-48