If the belt stops before
it
reaches the buckle, tilt the
latch plate and keep pulling until you
can
buckle it.
Pull
up on the latch plate to make sure it is secure.
ii
tne Delt
IS
not long enough, see
Safety Belt
Extender on page
1-30.
Make sure the release button
on
the buckle is
positioned
so you would be able to unbuckle the
safety belt quickly
if
you ever had to.
3.
To
make the lap part tight, pull down on the buckle
end
of
the belt as you pull up on the shoulder part.
1-25
To Next Page
Loading...
