Removing the Wheel Covers and
Wheel Nut Caps
Removing the
Flat
Tire
and Installing
the Spare Tire
If
your vehicle has an aluminum wheel with a center
cover that hides the wheel nuts, remove the center cover
by usin9 the flat end
of
the wheel wrench
to
nry
it
off.
If
your vehicle has a wheel cover, remove it by using the
flat end of the wheel wrench.
Pry
along the edge of
the wheel cover until it comes
off.
1.
Use the wheel wrench to loosen the wheel nuts,
but don’t remove them yet.
wrench to the bolt to create a jack handle.
2.
The
jack
a
bdt
at
ti-~e
e1-d.
Attach
the
vvk&
When reinstalling the wheel cover, carefully line up the
tire va!ve stem
and
the notch
in
the wheel cover.
5-73
To Next Page
Loading...
