Vinyl
Top
of
the
Instrument
Panel
Use warm water and a clean cloth.
Rub with a clean, damp cloth to remove dirt.
You may have to do this more than once.
Things like tar, asphalt
and
shoe polish will stain
if
you don’t get them off quickly. Use a clean cloth
and vinyl/leather cleaner. See your dealer for
this product.
Leather
Use-a soft cloth with
lukewarm
water
and
a mild
soap
or
saddle soap and wipe dry with a soft cloth. Then, let
the leather dry naturally.
Do
not use heat to dry.
For stubborn stains, use a leather cleaner. See your
dealer for this product.
Never
use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or shoe polish
on
leather.
Soiled or stained leather should be cleaned
immedi&!y.
!f
dirt
is
s!!9\>&
!e
?!&
inte
the
finish,
it can harm the leather.
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones
or waxes may cause annoying reflections in the
windshield and even make it difficult to see through the
windshield under certain conditions.
Interior Plastic Components
Use only a mild soap and water solution
on
a soft cloth
or sponge. Commercial cleaners may affect the
surface finish.
~~
Glass Surfaces
~~
Glass should be cleaned often. GM Glass Cleaner or
a liquid household glass cleaner will remove normal
tobacco smoke and dust films on interior glass.
See
GM
Vehicle Care/Appearance Materials
on
page
5-87.
Notice:
Don’t use abrasive cleaners on glass,
because they may cause scratches. Avoid placing
decals on the inside rear window, since they
may have to be scraped
off
later.
If
abrasive
cleaners are used on the inside
of
the rear window,
an electric defogger element may be damaged.
Any temporary license should not be attached
across the defogger grid.
5-83
To Next Page
Loading...
