2.
Slide the rear of the cushion up and under the
seatback
so
the rear-locating guides hook into
the wire loops on the back frame.
3.
With the seat cushion lowered, push rearward and
then press down on the seat cushion until the
spring locks on both ends engage.
4.
Check
to
make sure the safety belts are properly
routed and that no portion
of
any safety belt is
trapped under the seat.
Also
make sure the seat
cushion is secured.
1.
Buckle the center passenger position safety belt,
then route the safety belts through the proper slots
in the seat cushion. Don’t let the safety belts get
twisted.
5-94
To Next Page
Loading...
