If your vehicle has this feature, in very cold weather,
0°F
(-18°C)
or colder, the engine coolant heater
can help. You’ll get easier starting and better fuel
economy during engine warm-up. Usually, the coolant
heater should be plugged in a minimum of four
hours prior to starting your vehicle. At temperatures
above
32°F
(OOC), use of the coolant heater is not
required.
To
Use the Engine Coolant Heater
1.
Turn off the engine.
2.
Open the hood and unwrap the electrical cord.
The engine coolant heater cord is located on the
passenger’s side of the vehicle, above the
headlamp assembly.
3. Plug it into a normal, grounded
1
IO-volt AC outlet.
Plugging th :ord into an ungrounded outlet
could cause an electrical shock.
Also, the
wrong kind
of
extension cord could overheat
and cause a fire. You could be seriously
injured. Plug the cord into a properly grounded
three-prong
11
0-volt
AC
outlet.
If
the cord
won’t reach, use a heavy-duty three-prong
extension cord rated for at least
15
amps.
4.
Before starting the engine, be sure to unplug and
store the cord as it was before to keep it away
from moving engine parts. If you don’t, it could be
damaged.
How long should you keep the coolant heater plugged
in? The answer depends on the outside temperature, the
kind of oil you have, and some other things. Instead
your dealer in the area where you’ll be parking your
vehicle. The dealer can give you the best advice for that
particular area.
UI
llyll
ly
LU
1131
CVCl
ylllll
ly
I
IGIG,
VVG
U31\
LI
IUL
yuu
WVI
ILUVL
-1
1...
.:
.__.
I-
I:-*
-,.--,
+L:-- L,,,
,.,h
“-1,
+h,,+
,,~,,
I-.nn+qc+
2-25
To Next Page
Loading...
