Infotainment System 219
“Destination Contact” : Begin a
dialog to enter a specific destination
contact name.
“Cancel Route” : End route
guidance.
Voice Recognition for the
Phone
“Call <contact name>” : Initiate a
call to an entered contact. The
command may include location if
the contact has location numbers
stored.
“Call <contact name> At Home,”
“At Work,” “On Mobile,” or “On
Other” : Initiate a call to an entered
contact and location at home, at
work, on mobile device, or on
another phone.
“Call <phone number>” : Initiate a
call to a standard phone number
seven or 10 digits in length, and
also 911, 411, 066, or 611.
“Pair Phone” : Begin the Bluetooth
pairing process. Follow instructions
on the radio display.
“Switch Phone” : Select a different
phone for outgoing calls.
“Voice Keypad” : Begin a dialog to
enter special numbers like
international numbers. The numbers
can be entered in groups of digits
with each group of digits being
repeated back by the system. If the
group of digits is not correct, the
command “Delete” will remove the
last group of digits and allow them
to be re-entered. Once the entire
number has been entered, the
command “Call” will start dialing the
number.
“Voice Mail” : Initiate a call to voice
mail numbers.
Voice Pass-Thru
Voice pass-thru allows access to the
voice recognition commands on the
cell phone, for example, Siri
®
or
Voice Command. See the cell
phone manufacturer's user guide to
see if the cell phone supports this
feature. To activate the phone voice
recognition system, press and hold
g on the steering wheel for a few
seconds.
Voice Recognition for OnStar
(If Equipped)
“OnStar” : Begin OnStar Voice
Recognition.
Voice Recognition for Weather
(If Equipped)
“Weather” : Begin a dialog to enter
a weather location.
To Next Page
Loading...
Need help?
General
