224 Infotainment System
3. When the second call is active,
touch Merge to conference the
three-way call together.
4. Once all calls are merged, the
Merge button becomes an
Unmerge button. Touch to
unmerge the calls.
Some wireless service carriers
may not allow a merged call to
become unmerged.
Ending a Call
.
Press
c on the steering wheel
controls.
.
Touch End on the center stack
display to end all existing calls,
or touch End next to a call to
end only that call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. Touch the PHONE screen
button.
2. While in the Call View, touch
the up arrow to raise the
Interaction Selector.
3. Select KEYPAD and enter the
number.
Voice Mail
The default voice mail number is the
phone number of the outgoing
phone source. The voice mail
number can be changed in
Bluetooth settings.
To dial a voice mail number:
1. Touch the PHONE screen
button.
2. Select VOICE MAIL.
3. Select Call.
4. Enter the DTMF tones using
the keypad if needed.
Bluetooth (Voice
Recognition)
Using Bluetooth Voice
Recognition
To use voice recognition, press the
g button on the steering wheel. Use
the commands below for the various
voice features. For additional
information, say “Help” while in a
voice recognition menu. See Voice
Recognition 0 213 for help using
voice recognition commands.
Making a Call
Calls can be made using the
following commands.
Using the “Dial” or “Call”
Command
To call a number:
1. Press
g. The system responds
“Command Please,” followed
by a tone.
2. Say “Dial” or “Call” followed by
the complete phone number.
To Next Page
Loading...
Need help?
General
