J
Judith KnightSep 10, 2025
What causes abnormal noise in BuildClean 512000 Scrubber?
- DDaisy RosalesSep 10, 2025
If your BuildClean Scrubber is making abnormal noises, check that the cover latches are fastened.
To Next PageTo Next PageWhat causes abnormal noise in BuildClean 512000 Scrubber?
If your BuildClean Scrubber is making abnormal noises, check that the cover latches are fastened.
What does Error Code 5 mean on BuildClean 512000 Scrubber?
For Error Code 5 on your BuildClean Scrubber, clean the black rubber air intakes where the filters are installed. If the problem continues, contact Customer Service.
How to troubleshoot Error Code 6 on BuildClean 512000 Scrubber?
For Error Code 6 on your BuildClean Scrubber, clean the area (black rubber air intakes) where the filters are installed. Contact Customer Service if the problem persists.
How to troubleshoot Error Code 7 on BuildClean Scrubber?
For Error Code 7 on your BuildClean Scrubber, clean the area (black rubber air intakes) where the filters are installed. If the problem continues, contact Customer Service.
Essential warnings and guidelines for safe operation and handling of the air scrubber.
Instructions for connecting the power cord and turning the unit ON.
Steps to initiate the air cleaning process and select fan speed.
Explanation of available fan speeds (Low, Medium, High, Auto) and their recommended uses.
Lists error codes and their corresponding solutions or causes.
General| Model | BuildClean 512000 |
|---|---|
| Category | Scrubber |
| Power Source | Electric |
| Voltage | 120V |
| Airflow | 500 CFM |
| Filtration | 3-Stage |
| Filter 1 | Pre-Filter |
| Filter 3 | HEPA Filter |
| Filter Efficiency | 99.97% at 0.3 microns |
| Noise Level | 68 dB |