20
The Power Control button [See 2.3] allows you to select and maintain the same level
of power during your ride.
To use the power button, you accelerate to achieve the desired power level (you can
check its value on the dashboard) and then press the Power Control button to maintain
that power level.
Once this is done you can stop accelerating and the vehicle will continue its ride at the
desired power.
To turn o Power Control you just need to press any brake lever or press the “Power
Control” button again.
When in the Power Control mode you can accelerate to exceed the value of cruising
power if necessary.
In normal riding mode (with Power Control o), you can view the instantaneous power
level on the display, at the right of the driving mode (“POT” in the image shown).
Once the cruise power is selected it will be set and displayed on the dashboard display
until Power Control is turned o.
2.6. Using the POWER CONTROL Button
POWER CONTROL WILL BE
DEACTIVATED BY:
- PUSHING THE POWER CON-
TROL BUTTON
- PRESSING ANY OF THE
BRAKE LEVERS
RIDE WITH EXTREME CAUTION WHENEVER POWER CONTROL IS ON.
To Next Page
Loading...
