27
1. Adapt the seat and handlebar height to your size so that they are in a safe and
comfortable position. Make sure all items are well secured and that they are in the
proper position.
2. Adapt the position of the brake levers so that you can always reach them easily.
Make sure you are very familiar with the brake lever configuration (front brake to
the right / rear brake to the left).
[See 4.3]
3. Check the operation of the brakes. Press each brake lever individually while
pushing the vehicle to check that the wheels lock completely. [See 4.3]
4. Check tyre condition and pressure periodically [See 4.4]
5. With the engine stop button in the o position [See 2.3] operate the
accelerator control and release it to check that it returns to its initial position.
6. Check the condition of the sprockets, transmission plate and the chain
lubrication [See 4.5]. Make adjustments if necessary.
3.1. Prior checks
AFTER A FALL OR A MOTO-BIKE
ROLLOVER, YOU MUST PERFORM A
COMPREHENSIVE REVIEW BEFORE RIDING
THE VEHICLE AGAIN AND VISIT A BULTACO
MOTORS DEALER FOR A PROFESSIONAL
INSPECTION.
DETERIORATED TYRES OR TYRES
WITHOUT THE CORRECT PRESSURE
CAN CAUSE THEM TO BURST
UNEXPECTEDLY AS WELL AS A LOSS
OF CONTROL OF THE VEHICLE. LOW
PRESSURE WILL REDUCE THE RIDE RANGE
SIGNIFICANTLY.
To make sure your Brinco is ready for use, you must perform the following checks:
To Next Page
Loading...
