Bultaco brinco - Scheduled Maintenance Program

59
4.8. Maintenance Table
Chassis
Swing arm
Transmission
Brakes
Wheels
Suspension
Electrical
System
Hardware
Task to be carried out
by the user
Scheduled maintenance
by Bultaco
Component Task to Perform
Before
each use
After
each use
620 miles
or 6 months
Every 1550 miles
or 12 months
CHASSIS Check the general condition of the whole structure X X X X
STEERING Check for play of the steering tube bearing X X X
STEERING Check for play of the handlebar stan X X X
SADDLE AND SEATPOST Check quick lock X X X
SADDLE AND SEATPOST Check for play of seatpost X X X
SWINGARM Check the general condition of the whole structure X X X X
SWINGARM Check for play of swingarm bearing X X X
SWINGARM Check wheel axle bolt torques. X X X
PEDALS Check for play of power pedals X X
CHAIN Check for play/lubrication, clean and lubricate if necessary X X X X
CHAIN RING Check for wear, replace if necessary X
CRANK Check crank arms for play X X X
DERAILLEUR Check operation, clean and lubricate X X X X
SCHLUMPF Lubricate gear systems X
BRAKES Check braking power X X X
LEVERS Check lever adjustment X X X
PADS - DISCS Check condition X X X
PADS - DISCS Check for wear, replace if necessary X
CABLES Visual inspection. Search for deterioration or leaks X X X
TYRES Check pressure X X X
TYRES Check condition of the tyre, profile height X X X
WHEEL Check clearance of wheel bearings X X
WHEEL Check spoke tightness X X X
SHOCK ABSORBER Check the setting of upper and lower bearings X X
SHOCK ABSORBER Check for oil leaks X X
FORK Check the setting and dust cover X X
FORK Check for oil leaks X X
CONTROLLER Check controler status. Check drain holes X X
WIRING AND CONNECTORS Check cable condition and correct connection of components X X X X
BATTERY Check charge status X X X
BATTERY Charge Battery X X X
THROTLE Check free turning X X X
NUTS AND BOLTS Check the torque on all of them X X