57
4.6. Washing
We recommend regular cleaning to extend the lifespan of your Brinco and always ensure
proper performance.
You must be careful not to damage any of the components. In order to do that we
recommend:
Before cleaning, check that all electrical components are properly connected and
the vehicle is turned o. NEVER wash your Brinco with the battery removed
from the vehicle.
DO NOT use pressure washer or steam appliances that may cause the water to
penetrate the seals, bearings and power components. We recommend applying
soap with a soft sponge.
DO NOT directly wet any of the electrical power parts [See 1.3 ] or controls/
connectors located on the handlebar [See 2.3 ]. You can use a damp cloth to clean
these areas.
The plastic parts should be washed with a soft sponge and soap. Never use
abrasive products, solvents, or products that may scratch or damage them.
After washing, dry the vehicle with a clean dry cloth.
Once finished, wait until your Brinco is completely dry before operating it.
After cleaning and before using the vehicle, test the brakes. Apply pressure to
both brakes several times to remove the humidity in the pads.
BE CAREFUL WITH THE ELECTRICAL
COMPONENTS WHEN WASHING YOUR
VEHICLE..
5
6
1
2
3
4
To Next Page
Loading...
