Bunn Crescendo - Page 13

13
►
Recipe Setup (continued)
• Sets the dispense time for a
small beverage.
• Single cup mode will have small
or large to select from.
• Navigate to the next setting.
STEP 7
Use to
Navigate
Use to
decrease
Use to
increase
SW 1 SMALL TIME
(-) #.# sec (+)
• Sets the dispense time for a
Large beverage.
• Single cup mode will have small
or large to select from.
• Navigate to the next setting.
STEP 8
Use to
Navigate
Use to
decrease
Use to
increase
• Does beverage need an
espresso shot? If YES, it will
use the corresponding size set
for single touch or for the size
button selected in Multi.
• Navigate to the next setting.
STEP 9
Use to
Navigate
Use to
select
Use to
select
ESPRESSO SHOT?
NO YES
SW 1 LARGE TIME
(-) #.# sec (+)
• This will provide a catch test
to see how much product
dispenses from the hopper.
• Navigate to the next setting.
STEP 13
Use to
Navigate
TEST RT HOPPER
PRESS DISPENSE
• Choose the order in which the
ingredients dispense.
• Navigate to the next setting.
STEP 14
Use to
Navigate
Use to
select
Use to
select
DISPENSE ORDER
(-) (+)
• Options are any of three
hoppers or dilution. Cannot
choose “NONE”.
• Navigate to the next setting.
STEP 10
Use to
Navigate
• Sets the amount of product
used for the recipe that comes
from the hopper. If a hopper
is not used in the recipe, this
screen will not appear.
• Navigate to the next setting.
STEP 12
Use to
select
Use to
select
1st POWDER/DIL ?
(-) (+)
• Options are any of three
hoppers or dilution. “None”
can be selected.
• Navigate to the next setting.
STEP 11
Use to
Navigate
Use to
select
Use to
select
2nd POWDER/DIL ?
(-) (+)
Use to
Navigate
Use to
decrease
Use to
increase
HOPPER RIGHT STR
(-) (+)
OPERATING CONTROLS AND INTERFACE
continued >