Bunn Crescendo - Daily Rinse Cycle Operation

20
1. SELECT SIZE
CLEANING
RINSE CYCLE (Required Daily)
1. Open the door and place the NORMAL/PROGRAM/RINSE switch in
the RINSE position.
2. Close door and place a minimum 400ml container under the dis-
pense nozzles.
3. Press the button under RINSE on the screen.
4. Press any beverage selection button.
5. The dispenser will automatically run hot water through both
soluble mixing chambers, and flush the espresso brew chamber
with hot water.
6. After rinse cycle is complete, discard the rinse water collected in
the container.
7. Open the dispenser door, and place the NORMAL/PROGRAM/RINSE
switch in the NORMAL position.
NORMAL
PRGM
RINSE
NORMAL
PRGM
RINSE
continued >
SELECT MODE
RINSE CLEAN