Bunn Crescendo - Page 22

22
4. Close dispenser door and place a minimum 500ml container under
the dispense nozzles.
5. Press the button under NEXT.
CLEANING
continued >
8. When the cleaning cycle is complete, screen will display
SELECT MODE/ RINSE__ CLEAN.
9. Discard the waste water collected from the cleaning cycle.
10. Open the dispenser door, and place the NORMAL/PROGRAM/RINSE
switch in the NORMAL position.
7. During the cleaning cycle, the screen with display CLEANING CYCLE
IN PROGRESS/PRESS
TO STOP.
6. When screen displays PRESS DISPENSE TO START, press any
beverage dispense button to begin cleaning cycle.
PRESS DISPENSE
CLEANING CYCLE
TO START
IN PROGRESS
PRESS ANY BUTTON
SELECT MODE
TO STOP
RINSE CLEAN
CLEAN CYCLE: Weekly (continued)