Bunn-O-Matic Corporation
5
Infusion Tea and Coffee High Volume Brewer
Model: ITCB-DV HV
Note: Bullet points will only list additional features of the machine when compared
to the preceding model, which is the ITCB-DV.
High Volume Transformation Includes:
• Large 3-gallon (11.36 litre) tank provides back-to-back brewing capacity.
• Brews 5.1 to 11.9 gallons (19.3 to 45 litres) of perfect coffee per hour and 26.7
gallons (10.2 litres) of iced tea per hour.
• Includes both tea and coffee Smart Funnel®.
• Includes hot water bypass.
• Removable front panel.
• Optional side mount for hot water faucet.
• Rail locator for TF Server and TDO-N Dispenser. Invert rails to accommodate
regular tea dispensers.
• Tall trunk only.
Plumbing: 20-90 psi (138-621 kPa). Supplied with 3⁄8” male are tting. Requires
minimum of 1.5 gpm water ow.
Dimensions: 34.4”H x 10.1”W x 23.8”D
(87.4cm H x 25.7cm W x 60.5cm D)
Infusion Tea and Coffee Twin High Volume Brewer
Model: ITCB Twin HV
Note: Bullet points below will only list additional features of the machine
when compared to the preceding model, which is the ITCB-DV HV.
ITCB Twin HV Transformation Includes:
• Large 5.5 gallon tank compared to 3 gallon tank (ITCB).
• Brews 18.9 gallons (71.5 litres) per hour compared to 11.9 gallons per
hour.
• Additional hood fan and thermistor.
• Different CBA part number.
• Dimensions- Reference Spec Sheet.
• Additional relays in hood (d/c).
• Additional inlet valve for tank lling.
• No Dual Volt option. Requires 3-wires plus ground service rated
120/240V, single phase 60Hz..
• 20-90 psi (138-621 kPa). Supplied with 3⁄8” male are tting. Requires
minimum of 2.0 gpm water ow compared to 1.5 gpm.
To Next Page
Loading...
Need help?
General
