ITCB-DV HV Training
8
A. Programming (right)
Pressing and holding this pad allows entry into the programming menus. Pressing and releasing the pad steps
through each function screen while in the programming mode.
B. Programming (left)
This hidden pad can be used to scroll backwards through the function list while in programming mode.
C. Brew A Switch
When the ON/OFF is ON and the brewer is on the main screen (not in programming mode), momentarily pressing
and releasing this pad will begin a brew cycle for regular coffee. The Brew A switch is also used to select options that
appear on the display during programming such as “NO/( - )”.
D. Brew B Switch
When the ON/OFF is ON and the brewer is on the main screen (not in programming mode), momentarily pressing
and releasing this pad will begin a brew cycle for Decaf coffee. The Brew B switch is also used to select options that
appear on the display during programming such as “DONE”.
E. Brew C Switch
When the ON/OFF is ON and the brewer is on the main screen (not in programming mode), momentarily pressing
and releasing this pad will begin a brew cycle for Tea. The Brew C switch is also used to select options that appear
on the display during programming such as “YES/( + )”.
F. On/Off Switch
Pressing the “ON/OFF” pad will alternately turn the brewer on and off. Pressing this pad during the brew cycle will
interrupt the brew cycle, stopping the ow of water. Pressing this pad during programming of the brewer will exit the
setup and return to the main screen.
G. Full Batch Selector Switch
Pressing the switch corresponding to the Full batch selects the maximum amount of product to be brewed. Press-
ing a different batch switch after a brew cycle has been initiated does not change the brew batch in progress. Light
indicates the selected batch to brew. Also used in programming to adjust settings on both batch sizes.
To Next Page
Loading...
Need help?
General
