Burkert 0911 - 2 System Description; General Description; Operation

4 - 0911
english
3-point or PID controller on Output 1, 74 x 32 mm, with predefinable control
function (e.g., heating/cooling or moisten/dehumidify)
The following models are available:
2.1 General description
2 SYSTEM DESCRIPTION
2.2 Operation
BUTTONS
SET1 Display of Set-value 1
Changing and confirming a default during the programming phase
SET2 Display of Set-value 2
Type Configurable Input Parameter UDM
(Defined by display unit)
TU
Temperature
controller
PTC, NTC, Pt100
Thermoelements J, K, S
UDM = °C
UDM = °F
AU
Control device with
current / voltage
input
4 ... 20 mA
0 ... 1 V
0 ... 10 V
0 = °C; 1 = °F
2 = % RH
3 = bar
4 = PSI
5 = without units
up-
wards
down-
wards
LED 2
SET
button
ES LED
LED1
Alarm
LED
Output
LEDs