Burkert 6013 - OPERATING INSTRUCTIONS; Intended Use and Limitations

2
2 INTENDED USE
Unauthorised use of the Type6013 solenoid valve may be dan-
gerous to people, nearby equipment and the environment.
The device is designed for blocking, dosing, lling and ventilating
neutral gaseous and liquid media.
▶ In potentially explosive environments, the device must only be
used in accordance with the specications on the separate Ex
type label. The additional information and safety instructions
relating to Ex areas enclosed with the device must be adhered
to when deploying the device.
▶ Do not use devices without a separate Ex type label in poten-
tially explosive atmospheres.
▶ When using the device, observe the authorised data, and the
operating and usage conditions specied in the contract docu-
ments and in the operating instructions.
▶ Use the device only in conjunction with third-party devices and
components recommended or approved by Bürkert.
▶ Prerequisites for safe and trouble-free operation include correct
transport, storage and installation as well as careful operation
and maintenance.
▶ Use the device only as intended.
1 OPERATING INSTRUCTIONS
The operating instructions contain important information.
▶ Read the instructions carefully and pay particular attention to
the safety instructions.
▶ Store the instructions in such a way that they are available to all
users.
▶ The liability and warranty for the Type 6013 device will be invali-
dated if the operating instructions are not followed.
1.1 Symbols
→ Designates a procedure which you must carry out.
Warning of injuries:
DANGER!
Imminent danger! Serious or fatal injuries.
WARNING!
Potential danger! Serious or fatal injuries.
CAUTION!
Danger! Moderate or minor injuries.
Warning of damage:
NOTE!
English