3
2.1 Denition of the term “device”
The term “device” used in these instructions always refers to the
Type 6013 solenoid valve.
3 BASIC SAFETY INSTRUCTIONS
These safety instructions do not take into consideration any contin-
gencies and events that may arise during installation, operation and
maintenance.
High pressure danger.
▶ Switch o the pressure before working on the device or system.
Vent or empty the lines.
Danger from electrical voltage.
▶ Before working on the device or system, switch o the power
supply. Secure it against reactivation.
▶ Observe the applicable accident prevention and safety regula-
tions for electrical devices.
Danger of burns and risk of re.
Continuous operation may result in a hot device surface.
▶ Only touch the device when wearing protective gloves.
▶ Keep the device away from highly ammable substances and
media.
▶ Do not obstruct heat dissipation required for operation.
Destruction of the coil due to overheating.
▶ Electrically connect coil with mounted housing only.
▶ In the case of alternating voltage, pay attention to movable core.
To prevent injuries/damage to property, observe the following:
▶ Do not feed in any aggressive or highly ammable media.
▶ Do not modify the device.
▶ Secure the system/device against unintentional activation.
▶ Installation and maintenance work may be carried out by autho-
rised technicians only, with the appropriate tools.
▶ After an interruption in the electrical or pneumatic supply,
ensure that the process is restarted in a controlled manner.
▶ Do not subject the body to mechanical stress.
▶ Observe the general rules of technology.
English
To Next Page
Loading...
