Burkert 8045 - Page 29

29
Adjustment, commissioning
Type 8045
8.4. Using the navigation keys
You want to... Press...
move between parameters within a level or a menu.
•
to go to the next parameter.
•
0......9
to go to the previous parameter.
access the Parameters menu.
ENTER
+ simultaneously for 5 s, in the Process level
access the Test menu.
0......9
+ +
ENTER
simultaneously for 5 s, in the Process level
access the Information menu.
for 2 s, in the Process level, when the device status LED is orange or red.
reset the daily totalizer.
0......9
+ simultaneously for 2 s, when the daily totalizer is displayed in the
Process level
select the displayed parameter.
ENTER
confirm the displayed value.
ENTER
modify a numerical value.
•
0......9
to increase the blinking digit.
•
to select the digit at the left of the blinking digit.
•
0......9
+ to move the decimal point.
English